Thread Hack

What do you do when your spool is too big for the spindle?

Thread Travel Hack #1

Advice from Pepper Cory

This is what happens when I travel and must borrow a sewing machine to work while in a motel room. The loaner machine is almost always someone’s vintage Singer Featherweight. It’s a workhorse machine but has only a skinny vertical unmovable spool spindle. Putting a Presencia spool directly on a Featherweight spindle means the spool rattles around the spindle when sewing and can even go flying off!

Note that Presencia, like most machine sewing threads, is wound on tall spools with large holes in the center. The spools are designed for horizontal positioning (laying sideways) on the top of the machine.

Spool Hack Step 1

The solution to the skinny vertical spindle vs the big spool hole is to beef up the spindle thickness. Easy-peasy. Get two drinking straws, one thin and the other slightly thicker. Cut a 4″ piece off both. Slide the skinny straw over the spindle followed by the larger straw. That’s it! Now the spindle is large enough to hold the Presencia spool securely in place. Happy sewing!

Spool Hack Step 2

Spool Hack Step 3

Colonial Needle Company
74 Westmoreland Ave, White Plains, NY 10606 | 800-963-3353 | 914-946-7474 | 914-946-7002 Fax
Copyright © Colonial Needle Company